OLED Module 1.3 inch Display Module WITH SH1106 driver – KSH 600 at HIMASTORES Mombasa – best electronics in Kenya
Home / Displays / OLED Module 1.3 inch Display Module WITH SH1106 driver

OLED Module 1.3 inch Display Module WITH SH1106 driver

SKU: HMJ537 Category: Displays
KSH 600.00
Out of Stock

Product Description

SH1106 1.3 Inch OLED Display Module

HighResolution 128x64 OLED Screen with MultiInterface Support

This 1.3 inch OLED module features the *SH1106* driver chip and a 128x64 pixel resolution, delivering clear, highcontrast monochrome visuals for Arduino, ESP32, and Raspberry Pi projects [citation:3][citation:7]. With support for 3wire SPI, 4-wire SPI, and I2C interfaces, this display offers versatile connectivity options [citation:1].

HighResolution Display 128x64 pixels on a 1.3-inch screen with >160° viewing angle [citation:1][citation:7]
MultiInterface Support Works with 3wire SPI, 4wire SPI, and I2C protocols [citation:1][citation:3]
Operating voltage: 3.3V to 5V, compatible with both 3.3V and 5V logic systems [citation:3][citation:7]
The module uses the SH1106 driver. While some SSD1306 libraries may partially work, using a dedicated SH1106 library is highly recommended for full compatibility [citation:2][citation:10]

Technical Specifications

ParameterValue
Driver ChipSH1106 [citation:3]
Resolution128x64 pixels [citation:1][citation:7]
Display Size1.3 inch
Viewing Angle> 160° [citation:1][citation:7]
Operating Voltage3.3V / 5V [citation:3]
Interfaces3wire SPI, 4wire SPI, I2C [citation:1]

= Pin Configuration (8-Pin Version) =

PinDescription
VCCPower (3.3~5V) [citation:7]
GNDGround
NCNot connected [citation:7]
DINSPI data input / I2C SDA [citation:3]
CLKSPI clock / I2C SCL [citation:3]
CSChip select (active low) [citation:3]
D/CData/Command selection [citation:3]
RESReset (active low) [citation:3]

= Key Features =

+High Contrast OLED Technology Selfemissive pixels provide excellent visibility without backlight [citation:10]

+Flexible Interface Options - Selectable between SPI and I2C via onboard configuration resistors [citation:1]

+Wide Compatibility - Works with Arduino, ESP32, STM32, and Raspberry Pi [citation:3][citation:7]

+BreadboardFriendly Pre-soldered pins for easy prototyping [citation:10]

= Applications =

  1. Sensor data display for IoT projects
  2. Menu interfaces and status indicators
  3. Wearable and portable device screens
  4. Smart home and automation dashboards
Sharp and Clear Display - Excellent contrast ratio for crisp text and graphics
Highly Compatible - Works with most major microcontroller platforms

√ Available with curved (A) or straight (B) pin headers [citation:9]

√ Dedicated SH1106 libraries available for Arduino [citation:2][citation:11]

√ 4pin I2Conly version also available with pre-soldered pins [citation:10]

Troubleshooting

Display not showing content:

  • Verify correct voltage supply (3.3V or 5V) [citation:3]
  • Check that the correct interface mode (SPI/I2C) is selected on the module [citation:1]
  • Use a dedicated SH1106 library; some SSD1306 libraries may not work correctly [citation:10]

Garbled or missing display:

  • Confirm the display resolution is set to 128x64 in your code
  • Verify wiring matches the interface mode being used
  • Check that the RES pin is properly connected