F5 5mm Green Round Superbright LED – KSH 5 at HIMASTORES Mombasa – best electronics in Kenya
Home / Displays / F5 5mm Green Round Superbright LED

F5 5mm Green Round Superbright LED

SKU: HMJ410 Category: Displays
KSH 5.00
In Stock

Product Description

F5 5mm Green Round Superbright LED

High-Brightness Round LED for Indicators and Projects

The 5mm green superbright LED is a highintensity, standardsize through-hole component ideal for visual indicators, displays, and lighting applications. It offers a narrow viewing angle for focused illumination and excellent visibility even in daylight conditions [citation:11].

High Luminous Intensity - Up to 12,000 mcd for excellent visibility
Narrow 2030° Viewing Angle Focused light output for clear indicators
Operating voltage: 3.0V to 3.8V depending on model [citation:1][citation:11].
Currentlimiting resistor (typically 220Ω1kΩ) is required to prevent damage.
Maximum forward current: 25mA to 30mA - exceeding this will damage the LED.

Technical Specifications (Typical Values)

ParameterValue
:-:-
Package Type5mm (T-1 3/4) Round
MountingThrough-Hole (2.54mm pitch)
Forward Voltage (Typ.)3.0V - 3.8V [citation:1][citation:11]
Max Forward Current25mA - 30mA [citation:1][citation:11][citation:12]
Dominant Wavelength515nm - 530nm (green)
Luminous IntensityUp to 10,000 - 12,000 mcd [citation:1][citation:4]
Viewing Angle20° - 30° [citation:2][citation:11][citation:12]
Lens TypeWater Clear (water-clear) or Diffused [citation:11][citation:12]

> For maximum brightness, use a water-clear lens variant. Diffused lenses provide a wider, softer glow.

The anode (positive) lead is the longer lead; the cathode (negative) lead is the shorter lead [citation:7].

= Applications =

  1. Panel indicators and status displays [citation:3]
  2. Outdoor signage and displays
  3. LED matrix arrays
  4. General lighting and decoration
  5. Consumer electronics indicators
HighBrightness Design Superb for outdoor and daylight visibility.
Standard 5mm Package - Easy to integrate with breadboards, PCBs, and LED holders.

√ Compatible with Arduino, ESP32, Raspberry Pi.

√ Available in clear water-clear and diffused lens variants.

√ Longlife solidstate reliability.

Troubleshooting

LED not lighting:

  • Check polarity: longer lead is anode (+), shorter lead is cathode (-) [citation:7].
  • Verify a current-limiting resistor is installed (e.g., 220Ω to 1kΩ).
  • Ensure supply voltage meets forward voltage requirement (3.0V - 3.8V).

Dim or uneven brightness:

  • Confirm the correct resistor value is being used.
  • Check for loose or cold solder joints.