5V 25 BITS SQUARE WS2812 5050 RGB LED Ring Lamp Light + Integrated Drivers For Arduino Diy – KSH 250 at HIMASTORES Mombasa – best electronics in Kenya
Home / Displays / 5V 25 BITS SQUARE WS2812 5050 RGB LED Ring Lamp Light + Integrated Drivers For Arduino Diy

5V 25 BITS SQUARE WS2812 5050 RGB LED Ring Lamp Light + Integrated Drivers For Arduino Diy

SKU: HMJ803 Category: Displays
KSH 250.00
Out of Stock

Product Description

5V 25-Bit Square WS2812 5050 RGB LED Ring Lamp

Integrated Driver LED Ring for Arduino DIY Projects

This squareshaped LED ring features 25 individually addressable WS2812 5050 RGB LEDs with integrated drivers. Operating at 5V, it creates stunning light effects for Arduinobased projects.

25 Individually Controllable LEDs - Each pixel shows unique colors
Integrated Driver - No external components needed
Use 5V 2A power supply for full brightness
Add capacitor near power input for stability
Do not exceed 5.5V input voltage

Technical Specifications

ParameterValue
LED TypeWS2812B 5050
Number of LEDs25 pixels
ArrangementSquare ring
Input VoltageDC 5V
Color Depth24-bit RGB
Data Protocol1-Wire
Viewing Angle180 degrees
PCB ColorBlack / White

= Key Features =

Square Layout - Unique geometric light pattern

PixelLevel Control Each LED individually addressable

Integrated Driver WS2812B builtin IC

High Brightness - 5050 package for vivid colors

Easy DaisyChain Connect multiple rings together

= Applications =

  1. Ambient mood lighting
  2. Photography light rings
  3. Decorative lighting art
  4. Indicator displays
  5. Clock and timer designs
  6. Interactive light installations
Perfect for Creative Projects - Unique square format
Easy to Program - Compatible with NeoPixel library

√ Pre-soldered wires included

√ Mounting holes for installation

√ Individual pixel control

Connection Guide

Three-wire interface:

  • VCC: 5V power input
  • GND: Ground connection
  • DIN: Data input signal

Power requirements:

  • Each LED at full brightness: 50mA
  • 25 LEDs total: 1.25A max
  • Recommend 5V 2A power supply
Connect capacitor across VCC and GND
Use resistor on DIN line
Provide adequate power for all LEDs
Never connect data before power

Programming and Control

Works with standard libraries:

  • Arduino: Adafruit NeoPixel
  • FastLED library support
  • ESP32 and ESP8266 compatible

Control methods:

  • Set each pixel using RGB values
  • Create animations and patterns
  • Display text and graphics

Easy Integration - Single data pin control

Wide Compatibility - All major boards supported

Vivid 24-bit color display
Great for wearable projects

√ Compatible with Arduino IDE

√ Ready for immediate programming

√ Daisy-chain capable for expansion

Power Management

Power consumption at 5V:

  • All LEDs off: 1mA
  • Single LED white: 50mA
  • All white at max: 1.25A
  • Rainbow animation: 800mA typical

Efficient Design - Only lit LEDs consume power

Bright Display - Great for visibility

√ Works with USB power banks

√ Compatible with 5V Arduino boards

Installation Tips

Mounting options:

  • Use double-sided tape
  • Screw mounting holes provided
  • Surface mount or suspended
  • Combine multiple rings
Secure wires to prevent strain
Use diffuser for softer light
Protect from moisture
Avoid bending PCB excessively

## Troubleshooting

No output:

  • Check power connection
  • Verify data pin
  • Avoid loose connections

Wrong colors:

  • Check library settings
  • Verify color order
  • Avoid incorrect RGB mapping