BT134 TO-126 Transistor
KSH 10.00
In Stock
The BT134 is a highperformance, sensitivegate triac housed in a TO126 package. It is designed for bidirectional AC switching and phase control in a wide range of lowpower applications. Its sensitive gate allows for direct control by microcontrollers and logic ICs [citation:8][citation:10].
| Parameter | Typical Value | Notes |
|---|---|---|
| RMS On-State Current (IT(RMS)) | 4A | Maximum continuous current [citation:1][citation:9] |
| Peak Off-State Voltage (VDRM) | 600V | Blocking voltage; 800V variants available [citation:1][citation:11] |
| Non-Repetitive Surge Current (ITSM) | 25A | Peak current for one cycle (t=20ms) [citation:1] |
| Gate Trigger Current (IGT) | 7mA - 25mA | Varies by quadrant and variant [citation:9] |
| Gate Trigger Voltage (VGT) | 1.45V | Voltage required to trigger the gate [citation:9] |
| Holding Current (IH) | 15mA | Minimum current to keep the triac on [citation:9] |
= Key Features =
Sensitive Gate - Allows for direct control by microcontrollers and logic circuits [citation:8][citation:10]
High Surge Current - 25A capacity ensures robustness for demanding applications [citation:1]
Glass Passivated Junction - Provides reliability and high thermal cycling performance [citation:12]
Bidirectional Operation - Conducts current in both directions for AC control [citation:1]
√ Ready to use Standard TO126 package for easy mounting
√ Sensitive gate - Low trigger current for simple control circuits
√ Highly reliable Glasspassivated surface for stable operation
-Avoid exceeding the maximum junction temperature of 125°C [citation:1]
-Avoid using without a suitable snubber circuit for inductive loads to prevent false triggering
Avoid applying a gate voltage that exceeds the maximum gate ratings consult the datasheet
