5MM RED LEDS – KSH 5 at HIMASTORES Mombasa – best electronics in Kenya
Home / Displays / 5MM RED LEDS

5MM RED LEDS

SKU: HMJ106 Category: Displays
KSH 5.00
In Stock

Product Description

5mm Red LEDs

Standard T1 3/4 ThroughHole Light Emitting Diodes

5mm red LEDs are bright, through-hole components that serve as a reliable visual indicator for a wide range of electronics applications. With a standard round package and 2.54mm terminal pitch, they fit easily into breadboards and PCBs, making them a popular choice for Arduino, Raspberry Pi, and other DIY projects.

Standard 5mm (T1 3/4) Package Compatible with standard LED holders, breadboards, and 2.54mm pitch PCBs
Various Brightness Levels Available from standard (220mcd) to ultra-bright (up to 14,000mcd) options
Typical forward current is 20mA, with a typical forward voltage of 1.8V to 2.2V.
The longer lead is the anode (+) and the shorter lead is the cathode (-).
A current-limiting resistor is required to prevent the LED from being damaged by excessive current.

Typical Technical Specifications

ParameterValue
:-:-
Package Type5mm (T-1 3/4) Round
Mounting TypeThrough Hole
Terminal Pitch2.54mm (0.1 inch)
Dominant Wavelength620nm - 635nm
Forward Voltage (Typ.)1.8V - 2.2V
Forward Current (Max)20mA - 30mA
Viewing Angle20° - 60°

Specifications vary by model. Always check the manufacturer's datasheet for precise values.

Key Features

+High Brightness Options - Luminous intensities range from 2mcd standard to super bright 14,000mcd variants.

+Multiple Lens Types Choose from diffused (for wide angle) or water clear (for focused, highintensity light).

+Long Lifespan Solidstate reliability and rugged design for long-term use.

= Applications =

  1. Status indicators for electronics and microcontrollers.
  2. Signage, illuminated advertising, and decorative lighting.
  3. Commercial and residential lighting.
  4. Breadboard prototyping and general DIY projects.
Reliable and Widely Available - A standard component from leading manufacturers like Kingbright.
Easy to Integrate - Works with all common microcontrollers and development boards.

√ Available in various pack sizes (1, 25, 50, 100, 500, 1000+).

√ Compatible with standard 5mm LED holders and bezels.

√ IC compatible with low power consumption.

Troubleshooting

LED not lighting:

  • Check polarity: anode (long lead) to positive, cathode (short lead) to ground.
  • Verify a current-limiting resistor is installed.
  • Ensure the supply voltage meets the forward voltage requirement (typically 1.8V - 2.2V).

Dim or uneven brightness:

  • Confirm the correct resistor value is being used.
  • Check for loose or cold solder joints.