220picofarads Multilayer Ceramic Capacitor – KSH 10 at HIMASTORES Mombasa – best electronics in Kenya
Home / Capacitors and resistors / 220picofarads Multilayer Ceramic Capacitor

220picofarads Multilayer Ceramic Capacitor

SKU: HMJ1031 Category: Capacitors and resistors
KSH 10.00
In Stock

Product Description

220pF Multilayer Ceramic Capacitor (MLCC)

High-Frequency Capacitor for Timing, Filtering, and Tuning Applications

The 220pF (0.22nF) Multilayer Ceramic Capacitor is a smallvalue capacitor ideal for highfrequency circuits, timing applications, RF filtering, and crystal oscillator circuits. Available in both throughhole and surfacemount packages, this capacitor provides excellent stability with very low ESR for high-performance applications.

Capacitance value: 220pF 0.22nF 220,000pF (marked as "221" on the component)
Commonly used for crystal oscillators, RF circuits, high-pass filters, and EMI suppression
Do not exceed the rated voltage voltage derating is recommended for reliable longterm operation
For high-frequency circuits, use NP0/C0G dielectric for maximum stability

Common Specifications

The 220pF MLCC is available in multiple package sizes and voltage ratings to suit different applications:

ParameterCommon Variants
Capacitance220pF (±1 to ±10%)
Voltage Rating50V, 100V, 200V, 500V DC
DielectricNP0/C0G (high precision), X7R (general-purpose)
Temperature Range-55°C to +125°C
Package (SMD)0402, 0603, 0805, 1206
Package (Through-Hole)Radial (CK05 Series)

= Key Features =

HighFrequency Performance Very low ESR/ESL for excellent high-frequency response

Wide Voltage Options - Available from 50V to 500V DC for various applications

Precision Dielectric Options - NP0/C0G offers ±30ppm/°C temperature stability and ±1 to ±5% tolerance

Compact SMD Packages Available in 0402 to 1206 sizes for highdensity PCB designs

NonPolarized Easy assembly with no polarity concerns

HighQ Factor Suitable for resonant and tuned circuits

= Applications =

  • Crystal and ceramic resonator oscillator circuits
  • RF matching and tuning circuits
  • Highpass and lowpass filters
  • EMI/RFI suppression at high frequencies
  • Timing and delay circuits
  • PLL loop filters
  • Signal coupling in high-speed digital circuits
  • Antenna matching networks
Small Value for High Frequencies 220pF is ideal for GHzrange and VHF/UHF circuits
NP0/C0G Option Offers ultrastable capacitance over temperature and voltage

√ Ready to use - no polarity for easy assembly

√ Excellent high-frequency characteristics for demanding applications

√ Available in precision ±1% tolerance for critical circuits

Package Includes

Varies by seller - typically available in:

  1. Tape and reel (SMD) - quantities from 100 to 10,000+ pieces
  2. Bulk packs (throughhole) quantities from 10 to 1,000+ pieces
  3. Cut tape / loose pieces for prototyping
For crystal oscillator circuits, use NP0/C0G dielectric for stable frequency operation
The 221 marking indicates 220pF - first two digits are significant, third is multiplier (22 x 10¹ = 220pF)
For RF power applications, select high-voltage (500V) variants for reliability
This capacitor is ideal for crystal loading with 12pF to 30pF range - check your crystal datasheet
For high-precision timing circuits, ±1% NP0/C0G parts are the recommended choice
For high-frequency applications, use minimum lead length to avoid parasitic inductance

Avoid using X7R dielectric in precision timing or VCO circuits capacitance varies with temperature and DC bias

Avoid exceeding rated voltage for 50V rated parts, recommended operating voltage is typically ≤40V

Avoid placing capacitors far from ICs in highfrequency circuits - trace inductance degrades performance