JST 1.25 Connector Wire Cable SH 1.25MM Pitch 2pin Electronic Wire Single End – KSH 40 at HIMASTORES Mombasa – best electronics in Kenya
Home / Connectors / JST 1.25 Connector Wire Cable SH 1.25MM Pitch 2pin Electronic Wire Single End

JST 1.25 Connector Wire Cable SH 1.25MM Pitch 2pin Electronic Wire Single End

SKU: HMJ821 Category: Connectors
KSH 40.00
Out of Stock

Product Description

JST SH 1.25mm Pitch 2-Pin Connector Wire Cable

Precision Micro Connector for Compact Projects

This JST SH series connector features a 1.25mm pitch with 2pin configuration, designed for secure connections in compact electronic devices. The singleend wire cable provides reliable signal and power transmission.

UltraCompact Design 1.25mm pitch saves PCB space
Secure Connection - Locking mechanism prevents accidental disconnect
Match polarity carefully before connection
Use for low-current signal and power applications
Do not exceed 1A current rating

Technical Specifications

ParameterValue
Connector TypeJST SH Series
Pitch1.25mm
Number of Pins2
Wire Length150mm
Wire Gauge28 AWG
Current Rating1A max
Voltage Rating50V

= Key Features =

Preassembled Cable Ready for immediate use

Tinned Wire Ends - Easy soldering to PCBs

Locking Housing - Secure mating retention

Color Coded - Red (VCC) and Black (GND)

Flexible Wiring - Suitable for tight routing

= Applications =

  1. Sensor module connections
  2. Small PCB interconnects
  3. Battery pigtail leads
  4. LED strip connections
  5. IoT device wiring
Perfect for Miniature Devices
Reliable Locking Connection

√ Ready to use out of package

√ Both ends tinned for soldering

√ Standard SH series compatibility

Connection Guide

Wire identification:

  • Red wire: Positive / VCC
  • Black wire: Ground / GND
  • Connector is keyed for correct insertion
Solder directly to PCB pads
Use with mating SH series header
Verify pinout before soldering
Do not pull wires excessively

Installation Tips

For secure installation:

  • Strip only 2mm of insulation
  • Use heat shrink for strain relief
  • Secure cable with cable tie
Apply minimal solder to prevent bridging
Avoid bending at connector strain point
Keep away from sharp edges
Do not exceed 1A current

Compatibility

Works with all standard JST SH 1.25mm pitch headers and receptacles. Common mating parts include SMD and through-hole board connectors.

Standard Pitch - Widely used in electronics

Simple Polarity - Red and black color coding

√ Tinned ends for easy soldering

√ UL rated wire

√ 100% tested for continuity