WH148 Carbon Film Potentiometer 6PIN B5K – KSH 40 at HIMASTORES Mombasa – best electronics in Kenya
Home / Capacitors and resistors / WH148 Carbon Film Potentiometer 6PIN B5K

WH148 Carbon Film Potentiometer 6PIN B5K

SKU: HMJ1063 Category: Capacitors and resistors
KSH 40.00
Out of Stock

Product Description

WH148 Carbon Film Potentiometer 6PIN B5K

DualGang Linear Potentiometer for LowImpedance Stereo and Precision Control

The WH148 B5K is a dualgang (6pin) carbon film rotary potentiometer with a 5K ohm resistance and a linear (Btaper) response curve. This compact 16mm diameter component integrates two independent potentiometers in a single housing, sharing a common shaft for simultaneous, synchronized control making it ideal for lowimpedance stereo audio circuits, headphone amplifiers, balanced signal processing, and precision dualchannel adjustments.

Resistance value: 5K ohms ±20% tolerance
Linear (Bcurve) taper resistance changes proportionally with rotation angle
Dual-gang design with 6 pins (3 pins per channel)
Total mechanical rotation: 300° ±5°
Ensure proper wiring identification - each gang has its own input (pin 1), wiper (pin 2), and ground (pin 3) set
Do not exceed 50V maximum operating voltage (B-curve variants at 5K)

Technical Specifications

ParameterValue
Resistance5K ohms ±20%
TaperLinear (BCurve) resistance changes linearly
Number of Gangs2 (Dual/stereo)
Number of Pins6 (3 per gang)
Rated Power0.125W (B-curve)
Max Operating Voltage50V (B-curve)
Total Rotation Angle300° ±5°
Rotational Life10,000 cycles
Rotational Noise≤47mV
Shaft Diameter6mm
Shaft Length15mm (typical)
Operating Temperature-10°C to +70°C
Insulation Resistance> 100MΩ at DC500V

= Key Features =

DualGang Design Two independent potentiometers on one shaft for stereo or dual-channel control

Linear (B) Taper - Predictable linear resistance change for precision adjustments

6Pin Configuration Provides separate connections for each channel (3 pins per gang)

Low Resistance Value 5K ohms ideal for lowimpedance stereo audio and headphone circuits

Low Rotational Noise - ≤47mV ensures clean, stable signal output

Compact 16mm Form Factor - Fits standard panel mounting applications

Carbon Film Element Reliable, costeffective resistive material for general-purpose use

= Applications =

  • Stereo headphone amplifiers
  • Low-impedance stereo volume control
  • Balanced signal processing (low-Z circuits)
  • Audio mixers and DJ equipment
  • Portable and battery-powered stereo devices
  • Studio recording equipment
  • Laboratory test equipment
  • Voltage divider circuits (dualchannel, lowZ)
  • Hobbyist and DIY electronics projects
DualGang Synchronized Control Perfect for stereo balance and dual-channel applications
5K Low Resistance Ideal for lowimpedance stereo headphone and audio applications

√ Ready to use - standard 6mm shaft with nut and washer included

√ Low rotational noise - 47mV maximum for clean operation

√ 10,000 cycle durability longlasting performance

Package Includes

  1. 1x WH148 6-Pin Dual Potentiometer (B5K)
  2. 1x Mounting Nut
  3. 1x Washer
For stereo headphone amplifiers, use this 5K pot for low-Z volume control with minimal noise
For battery-powered stereo devices, the lower resistance ensures lower noise and better signal integrity
For balanced audio circuits, use both gangs for differential signal control
Identify pin functions: for each 3-pin gang, pin 1 input/high, pin 2 wiper/output, pin 3 = ground/low
This low resistance (5K) is preferred for lowimpedance headphone outputs and linelevel signals
Potentiometer is also known as the RV16AF series in some markets

Avoid exceeding 0.125W power rating to prevent overheating

Avoid overtightening the mounting nut- as this can damage the shaft or housing

Avoid use in highimpedance circuits- as the low resistance may load the signal source excessively