XH-W3005 DC 24V 10A Digital Humidity Controller
Professional Humidity Control for 24V Systems
The XHW3005 DC 24V is a highperformance digital humidity controller designed for 24V DC systems with 0~99% RH measurement and 10A relay output. This hygrostat provides precise automatic control for humidifiers, dehumidifiers, and ventilation systems with its built-in sensor and large LCD display.
Built-in sensor with ±3% RH accuracy
Compatible with HUM and DEH operating modes
Rated for 24V DC 10A max - do not exceed
Technical Specifications
| Parameter | Value |
|---|
| Model | XH-W3005 (W3005) |
| Power Supply | 24V DC |
| Relay Output | 10A (resistive load) |
| Humidity Range | 0 ~ 99% RH |
| Measurement Accuracy | ±3% RH |
| Temperature Range | -40°C ~ 120°C |
| Sensor Type | Built-in digital sensor |
| Display | Large LCD with backlight |
| Power Consumption | < 3W |
| Working Temperature | -10°C ~ 60°C |
| Dimensions | 80 x 55 x 35 mm |
= Key Features =
High Precision - ±3% RH accuracy for reliable control
Dual Mode - Switchable HUM/DEH operation
Large LCD Clear realtime humidity and temperature readings
10A Relay Direct control of highpower 24V devices
Wide Range - 0~99% RH adjustable setpoint
Memory Function - Retains settings after power loss
Temperature Display - Shows current temperature alongside humidity
Compact Design Spacesaving form factor
= Applications =
- Mushroom cultivation and growing rooms
- Greenhouse and agricultural environments
- HVAC systems and climate control
- Seed germination and plant propagation
- Home wine cellars and cigar humidors
- Industrial storage and warehouses
- Museum and archival preservation
- Food processing and storage facilities
- Laboratory and clean room environments
- 24V automotive and marine applications
How to Set Up
- Connect 24V DC to power input terminals (+/-)
- Wire load to relay output (COM/NO/NC)
- Power on and select HUM or DEH mode
- Set desired humidity level using UP/DOWN buttons
- Adjust hysteresis if needed (default 3% RH)
Default hysteresis is 3% RH to prevent rapid cycling
For critical applications, set to 1% for tighter control
Use qualified electrician for permanent installation
Modes Explained
HUM Mode: Relay activates when humidity falls below setpoint (humidifier runs)
DEH Mode: Relay activates when humidity rises above setpoint (dehumidifier runs)
Important Settings
| Parameter | Range | Default |
|---|
| Setpoint (H/S) | 0-99% RH | 50% |
| Mode (COD) | HUM/DEH | HUM |
| Hysteresis (DIF) | 0.1-9.9% | 3.0% |
| Calibration (CAL) | ±9.9% | 0.0% |
= Calibration Instructions =
Press and hold SET for 5 seconds to enter menu, navigate to CAL parameter, adjust offset to match reference hygrometer, press SET to save.
Positive offset (+) increases displayed reading
Negative offset (-) decreases displayed reading
Calibrate annually or when accuracy issues arise
What's Included
- XH-W3005 DC 24V Controller
- Built-in Humidity Sensor
- Mounting Brackets with Screws
- User Manual
Why Choose XH-W3005 DC 24V?
±3% RH accuracy for reliable humidity control
Dedicated 24V DC power input for mobile and industrial systems
Dual humidification and dehumidification modes
Simple operation with intuitive interface
Versatile applications across industries
Costeffective professionalgrade solution
√ Ready to use out of the box with pre-calibrated sensor
√ Large LCD for easy reading in any condition
√ Memory retains settings during power interruptions
√ 10A relay capacity for direct load control
√ Compact design fits in standard electrical panels
Safety Precautions
Installation by qualified personnel only
Disconnect power before wiring connections
Do not exceed 10A current rating
Keep away from water splashes and direct sunlight
Do not use in explosive or flammable environments
Ensure proper ventilation around controller
Do not attempt to open or modify the unit
Verify correct polarity when connecting 24V DC
For loads exceeding 10A, use an external contactor or relay
Install at least 2 meters above floor level for best sensor performance
Avoid installing in areas with chemical vapors or condensation
Troubleshooting Common Issues
"ERR" or "-" display - Sensor connection issue or sensor failure
Relay not switching - Check power supply and wiring connections
Inaccurate reading - Perform CAL adjustment or relocate sensor
Blank display - Check 24V DC power input and polarity
Relay clicking rapidly - Increase hysteresis (DIF) setting
Cannot change settings - Press and hold SET for 5 seconds
For "ERR" error, try resetting by power cycling the unit
If problems persist, contact our support team
Compatibility Guide
| Device Type | Compatibility |
|---|
| 24V DC Humidifiers | √ Yes (within 10A) |
| 24V DC Dehumidifiers | √ Yes (within 10A) |
| 24V Ventilation Fans | √ Yes (within 10A) |
| 24V Misting Systems | √ Yes (within 10A) |
| 24V Heating Elements | √ Yes (within 10A) |
| Automotive Systems | √ Yes (12V-24V compatible) |
= Quick Reference: Default Factory Settings =
| Setting | Value |
|---|
| Humidity Setpoint | 50% RH |
| Control Mode | HUM (Humidification) |
| Hysteresis | 3.0% RH |
| Calibration Offset | 0.0% RH |
| Delay Time | 0 minutes |
? Adjust these settings to suit your specific application requirements
Maintenance Tips
√ Clean unit surface with dry cloth only - do not use liquids
√ Check wiring connections periodically for tightness
√ Verify humidity reading against reference hygrometer every 6 months
√ Keep sensor area free from dust and debris
√ Test relay function periodically
Quick Comparison: 24V vs 220V Versions
| Feature | 24V DC Version | 220V AC Version |
|---|
| Power Input | 24V DC | 90-240V AC |
| Best For | Automotive, marine, solar systems | Home, industrial AC power |
| Safety | Low voltage, safer handling | Standard mains voltage |
| Relay Rating | 10A @ 24V DC | 10A @ 220V AC |
Choose the XHW3005 DC 24V for reliable humidity control in lowvoltage systems! Whether you're automating a greenhouse, protecting valuable equipment, or managing climate in mobile applications, this controller delivers professional-grade performance with the safety of 24V DC operation.
XHW3005 W3005 24V DCHUMIDITYCONTROLLER HYGROSTAT LOWVOLTAGE CLIMATECONTROL AUTOMATION HUMIDIFICATION MUSHROOMGROWING GREENHOUSE SOLARPOWER MARINE AUTOMOTIVE New Best Seller 24V
